MS series melt-blown filter element is a cylindrical depth filter element made of polypropylene as raw material and continuous polypropylene long fibers produced by the melt-blown process.
Melt-blown filter element is a tubular filter element made of non-toxic and odorless polypropylene particles, which are heated, melted, spun, drawn, and shape the raw material is mainly polypropylewhich, it can be called PP melt-blown filter element.
It is not only used in water purification in large quantities. It also has excellent chemical compatibility and is suitable for filtration of strong acids, alkalis, and organic solvents. Strong dirt holding capacity, long service life, and low cost.
First, using polypropylene as raw material, it is made of continuous polypropylene long fibers produced by the melt-blown process.
Second, high filtration accuracy, large flow, uniform structure, large dirt holding capacity, and long service life
Third, it has good chemical compatibility, without any additives, and the fibers are not easy to fall off
Fourth, it is widely used
High dirt retention capacity:
In the deep layer of the entire filter element, the effect of capturing particles according to density classification is realized, so that the efficiency of the filter element can be fully exerted; higher dirt retention capacity means long service life, low replacement frequency, and cost savings; the surface density of the filter element is The density gradually increases from the surface to the center of the filter element; there are no surface blind spots that reduce the flow rate of the filter element and increase the frequency of replacement.
Pure polypropylene structure:
High-temperature bonding fiber; does not contain humectants, antistatic agents and binders, etc.; a wide range of chemical resistance; easy to handle after incineration; meets the requirements of the FDA food and beverage industry; will not produce leachables and emissions.
Pharmaceutical industry: pre-filtration of various injections, liquid medicines, injection bottle washing water, pre-filtration of large infusions and various antibiotics, and traditional Chinese medicine injections.
Food industry: Filtration of alcohol, beverages, and drinking water.
Electronics industry: Pre-filtration of pure water and ultrapure water.
Petroleum and chemical industry: filtration of various organic solvents, acids, and alkalis, oil field water injection filtration.
Filtration precision: 1μm, 3μm, 5μm, 10μm, 20μm, 30μm, 60μm;
Applicable P H: 1~13;
Maximum differential pressure: forward 0.4Mpa;
Working temperature: under 0.25Mpa, <70°C;
Sterilization: resistant to 126°C, online steam sterilization for 30 minutes;
Endotoxin: The water extract of the filter column is tested by 1AL, and the endotoxin content is lower than 0.5EU/ml.
Wuxi Lenge Purification Equipments Co., Ltd. is a professional purification equipment manufacturer. Suitable for pharmaceuticals, laboratory, food & beverage, electronics, etc. If you are interested in purification equipment, please get in touch with us! You can call 86-510-85189266. Or send an email to firstname.lastname@example.org.
Usage of liquid filter
Liquid filter is an indispensable device on the transmission medium pipeline. It...
Do you know the Dynamic Pass Box
The Dynamic Pass Box can transfer materials, appliances, etc. under A-level envi...
Do you know high temperature resistant high efficiency filter?
The high temperature resistant and high-efficiency filter uses a partition desig...
How much do you know about stainless steel？
We have professional stainless steel storage racks, which can be stored for long...