1. Civil Use and Industrial Use Air Filter:
ØHousehold air purifier, automobile air conditioning filter;
ØMain material PP, PP / PET composites;
ØFiltration efficiency, E12 or lower.
ØFor clean room (primary, middle and high efficiency);
ØFor HVAC system in public places ((primary and middle efficiency);
ØFor engine protection (primary efficiency, cotton / wood pulp, generally cartridge type)
ØFor air intake filtration of air compressor
2. Can the air filter be cleaned?
ØThe air filter cleaning mentioned by the customer is generally aimed at the primary and medium efficiency air filter, not the high efficiency air filter;
ØThe main reasons are poor air quality, short service life of the air filter and high operating cost;
ØFilter cleaning is not recommended;
ØAfter cleaning, the static electricity completely disappears and the filtration efficiency is low;
ØDuring the cleaning process, the filter material structure will change and the filtration efficiency will be reduced;
ØAfter cleaning, particulate matter remains on the air inlet and outlet surfaces, increasing the load of the post air filter;
ØIf the air filter is damaged during cleaning, especially if it is invisible to the naked eye, it will cause leakage and affect the post air filter.
3. Reasons for sudden shortening of filter service life
ØThe resistance value of a normally used air filter will not change suddenly, which is generally caused by changes in the external environment;
ØThe content of particulate matter in the fresh air increases, such as the frequent occurrence of haze in winter and willow catkins in spring;
ØIn winter, especially in Northeast China, there is rain and snow on the air filter surface, causing the air filter to be blocked;
ØThe content of particulate matter in the return air increases, such as the change of production process, the increase of production frequency and the increase of personnel activities;
ØDamage of wet and hot elements and disinfectants to the air filter;
ØCustomers pay more attention to seasonal changes in the process of use, and daily data record accumulation can provide basic support for air filter replacement.
4. How to judge the air inlet and outlet surfaces?
ØIt cannot be judged simply by the position of the sealing strip. Some of the sealing strips are on the air inlet surface and some are on the air outlet surface, depending on the installation form of the air filter inside the equipment.
ØFor the liquid tank filter, it relies on gel sealing, and the gel surface is the air inlet surface.
ØFor filters without partition and with partition, the air outlet surface is generally the surface whose frame is leveled with the filter surface.
5. Advantages and disadvantages of glass fiber (GF) filter material and polytetrafluoroethylene (PTFE) filter material of high efficiency air filter
ØLong term use in clean industry, good filtration effect and stable performance;
ØLarge dust capacity and long service life. The electronic industry is super efficient and can be used for 30 years;
ØInorganic materials, low TVOC content;
ØApplicable to aerosol test leakage point;
ØHigh gram weight and high resistance value;
ØNot resistant to HF (hydrofluoric acid).
ØStretch film, low thickness, need to rely on the support layer for molding;
ØSmall dust capacity and unstable service life;
ØHigh TVOC content;
ØNot applicable to aerosol test leakage point (causing membrane hole blockage);
ØLow resistance value, about half of GF;
ØGood chemical stability and wider application range.
6. How can we control the quality of air filters?
We have equipped with German TOPAS testing lines, to test the air volume, resistance and efficiency of the filter comprehensively so as to ensure the excellent quality of air filters from LENGE.
Detailed testing items are as below:
- TOPAS ALF114 testing line for primary and medium efficiency air filters:
ØAir volume - resistance
- TOPAS AFS150 testing line for high efficiency air filters:
ØAir volume - resistance
ØW-type high efficiency and inspectability
As the ONE-STOP Solutions Provider, we have rich experience and matured professional team, if you have any question about filtration and purification, welcome to send inquiry to us.
Do you know MS Series Melt Blown Filter Cartridge?
MS Series melt blown filter cartridge is manufactured by the melt-blown process ...
Do you know High Temperature-Resistant Separator HEPA Filter?
From the name, it can be seen that it is a high-efficiency air filter with high-...
Do you understand MS filter element?
MS series melt-blown filter element is a cylindrical depth filter element made o...
The V-Bank filter housing plays a great role in the filter.
LENGE,the high value-added filter cartridge products will be put into the market...