The PTFE membrane microporous pleated filter element has excellent oxidation and chemical resistance, wide applicability, excellent chemical compatibility, and good oxidation resistance.
The PTFE polytetrafluoroethylene microporous membrane pleated filter element adopts natural hydrophobic polytetrafluoroethylene (PTFE) filter membrane and polypropylene material components manufactured in a controlled class 100 clean environment through advanced hot-melt sealing technology. Does not contain any adhesives and surfactants, the membrane stack is composed of a PTFE filter membrane and inlet diversion layer, which has excellent oxidation resistance and chemical resistance.
Filter material: natural hydrophobic polytetrafluoroethylene (PTFE) filter membrane
Support / Diversion Layer: Polypropylene
Mandrel/Housing/End Cap/Tip: Polypropylene
Seal Joint/Locking Fins: 222,,226 Polypropylene, Built-in Stainless Steel Reinforcement Options
Sealing ring: silicone rubber, EPDM rubber, fluorine rubber, etc.
Sealing technology: adhesive-free hot melt sealing
Has excellent high-temperature resistance and wide chemical compatibility.
All constituent materials meet the biological test characteristics of USP Class VI 121 ℃ plastic products and meet the food contact materials listed in the relevant provisions of Chapter 21 of the United States Code of Federal Regulations (CFR).
Natural hydrophobic material, suitable for sterilization and filtration of various gases.
The filter batch has successfully passed the bacterial challenge test required by regulations, LRV >7, and can maintain its integrity after repeated high-pressure disinfection.
Each filter element is tested for integrity before leaving the factory. The integrity detection limits used were validated against bacterial challenge test results.
ISO9001 and ISO14001 systems and production in a 10,000-level clean environment.
Production test records and usage of traceable products
Large gas flow, low differential pressure, and long service life.
1. Aseptic exhaust of fermentation tanks, storage tanks and batching tanks, and air intake filtration
2. Electronic industry high-purity gas filtration
3. High-purity steam filtration
4. Aseptic delivery of compressed air
5. Solvent sterilization filtration; acetone filtration
Wuxi Lenge Purification Equipment Co. Ltd. is a professional purification equipment manufacturer. Suitable for pharmaceuticals, laboratory food, beverages, etc. If you are interested in purification equipment, please contact us! You can call 86-510-85189266. Or send an email to firstname.lastname@example.org.
Stainless steel appliance products and safety
Stainless steel is made of iron-chromium alloy mixed with some other trace eleme...
The advantages of medical stainless steel trolley .
LENGE purification equipment are the product of over 20 years of experience, exp...
Application of stainless steel wash basin sink
stainless steel wash basin sink are made of solid materials. The steel materials...
The working principle of v-bank filter
The working principle of the filter is: when the filter works, the water to be f...