Do you know the performance characteristics of the plate air filter?

Panel air filter performance:

◆Using granular activated carbon through a special chemical formula treatment

◆Strong adsorption capacity, high removal efficiency, and reliable performance

◆Easy installation and maintenance, strong versatility

◆The frame material can be galvanized steel plate, stainless steel plate, or aluminum alloy

The products produced by professional manufacturers are guaranteed in terms of quality and price. His use also involves many aspects, and the utilization rate is constantly improving. The flat air filter has been closely related to the current life and has received many affirm.

As a kind of primary air filter, the plate air filter is widely used, such as electric power, environmental protection, the chemical industry, and other heavy industrial enterprises. And this type of air filter has many advantages, long service life, strong filtering ability, and is widely praised.

The flat air filter is mainly used for the primary filtration of the air conditioning system and the pre-filtration of the multi-stage filtration system. It has the characteristics of large air volume and small resistance in capturing particles above 5um (microns), dust, and various suspended solids, and it has a long service life. , What is the internal structure of the flat air filter with these characteristics? The outer frame of the flat-type air filter is made of aluminum profiles but galvanized and stainless steel frames are also used according to different needs. The filter material protection net is made of 5.0 plastic-sprayed iron wire or galvanized iron wire, which is easy to disassemble and can be cleaned repeatedly. In the case of a relatively poor environment, many need to perform multiple filtrations, and this demand also creates the emergence of multiple filters, which avoids dust and disease in the air. Multiple filters; avoid dust and bacteria in the air Entering the room, multiple activated carbon filters can effectively block dust and bacteria, filter the air, and ensure that the air entering the room is clean.

Cleaning of the panel air filter:

First, open the air-inhaling grid in the device, pull the air filter hook, and gently pull the device out, then use a vacuum cleaner to remove the dust from the device, or rinse with cooler water. If there is too much dust in the equipment during cleaning, you can use a softer brush to gently scrub, but do not use too much force, so that the cleaning effect is easy to achieve. Remember that if you use this method, remember to dry the water after cleaning, otherwise, a small amount of water will accidentally enter the device and affect the normal function of the device. Never use water above 50 degrees Celsius for cleaning, which will cause the device to deform or fade.

The second is to install the equipment and restore it to its original state, gently put it into the grid during installation, and then fix it to prevent loosening.

Finally, close the grid that has been opened, and press and hold the filtered signal reset button, so that the cleaning reminder sign will be displayed. At the same time, it should be reminded that if the use environment of the air filter is too poor, that is, there is too much dust, then the number of cleanings should also be increased to ensure the freshness of the air.

Wuxi Lenge Purification Equipments Co., Ltd. is a professional manufacturer of purification equipment, we have a variety of microporous membranes for you to choose from. Suitable for pharmaceuticals, laboratories, food and beverage, electronics, etc. We also have stainless steel furniture. If you are interested in purification equipment and stainless steel furniture, please contact us! You can contact us at 86-510-85189266. Or send an email to export@wxljjh.com.