Bag in bag out a filter, that is, Bag In Bag Out Filter, usually referred to as BIBO, also known as duct-type exhaust air high-efficiency filter device.
Bag in bag out a filter, that is, Bag In Bag Out Filter, usually referred to as BIBO, also known as duct-type exhaust air high-efficiency filter device. Since the filter has trapped highly active or highly toxic harmful aerosols during the working process, it is necessary to ensure that the filter does not have any contact with the external environment during the replacement process. The filter replacement process is carried out in a sealed bag, so it is called the bag feeding Bag out the filter. Its use can effectively prevent the spread of harmful aerosols and avoid biological hazards to personnel and the environment. It is a filter device used in specific biological risk environments to remove harmful biological aerosols in the exhaust air. Generally, it has in-situ disinfection. And leak detection function, in the process of use, needs to be equipped with a biological sealing valve and other components.
It is sprayed with 304 stainless steel or cold-rolled plate (stainless steel 316L optional).
The housing can accommodate standard liquid tank high-efficiency filters and pre-filters.
All seams are fully welded.
A filter removal lever is installed, which can pull the filter to the replacement position.
Each filter access port is equipped with a PVC replacement bag.
Upstream filter sealing: Each high-efficiency filter is sealed relative to the air inlet surface of the frame to prevent the accumulation of internal pollutants.
1. Independent door
Each filter assembly, pre-filter, and high-efficiency filter is in a protective bag with a separate door for safe, economical, and optional maintenance services.
2. External flange
All housing flanges are flanged to facilitate field connection and keep them away from contaminated airflow.
3. Standard final filter
The basic housing is designed for use with standard HEPA filters. Filters include high-capacity high-efficiency filters, each with an air volume of up to 3400m3/h.
4. Seal bag
A sealed bag kit is used for each door. Each PVC sealed bag is 2700mm long.
5. Internal locking mechanism
All fluid-tight filters are sealed using an internally actuated locking arm.
6. Filter module
Primary filter - plate filter G4;
High-efficiency filter - high-efficiency filter H14 without partition in the liquid tank.
1. The installation, replacement, and detection of the filter are all carried out under the protection of the PVC bag (or the high-temperature bag), and the filter unit does not come into contact with the outside air at all.
2. When installing the filter for the first time, push the new filter unit into the filter box along the track to lock it, and then install the PVC bag on the specially designed flange mouth, and fasten it with a safety belt to ensure that the PVC bag and the flange are in contact with each other. Finally, fold the PVC bag and close the access door, so that the PVC bag and the filter unit are sealed together in the bag-in-bag-out box.
3. When replacing the filter unit, the staff opens the access door, puts both hands into the gloves on the PVC bag, releases the locking device of the filter unit, slides the used filter unit into the PVC bag, and then ties the bag in the middle Cut the section containing the filter unit so that the spent filter unit is removed from the box through the PVC bag. Then put the new filter unit into a new PVC bag, then put the new PVC bag on the flange mouth and tie it tightly, remove the remaining bag mouth on the flange, put it into the gloves of the new bag, tie it tightly and cut it off Then, roll up the new bag, close the access door and press it tightly, which completes the entire replacement process.
During the entire installation and replacement process, except for the first installation of the filter unit, all dirty filter units are removed and new filter units are entered through PVC bags to ensure that the entire system is isolated from the outside world. It can be replaced directly without fumigation and disinfection, saving a lot of money. time and more secure. It is also because of this way of replacing the filter unit that this type of filter equipment is vividly called bag in bag out (BIBO).
Wuxi Lenge Purification Equipment Co. Ltd. is a professional purification equipment manufacturer. Suitable for pharmaceuticals, laboratory food, beverages, etc. If you are interested in purification equipment, please get in touch with us! You can call 86-510-85189266. Or send an email to firstname.lastname@example.org.
The Basic Components Of A Dynamic Pass Box And Their Presence At A Clean Room
A dynamic pass box, also known as a transfer switch, is typically designed in tw...
HEPA air purification system solves six problems of indoor air
HEPA air purification system can suck the dirty air into the interior and remove...
Do you know hepa air filter?
H13/H14 hepa air filters are mainly divided into H13 high efficiency filter and ...
Main application of PES membrane filter cartridge
Wuxi Lenge Purification Equipments Co., ltd. (briefly as “LENGE” here) in China ...