Information
Information
Address: Block 1#, Shuangxin Economic Park, Xuelang, Wuxi City, Jiangsu Province, China.
TEL: +86-510-85189266
FAX: +86-510-85189260
EMAIL: export@wxljjh.com
MS Series melt blown filter cartridge is manufactured by the melt-blown process of the pure polypropylene resin. The filtration structure is formed by thermal bond without using any binders, or adhesives. It has the Graded pore structure of depth filtration with fine fibers inner and coarse fibers outside, It can remove contaminants effectively, such as suspended substances, particulate, and rust, providing efficient filtration and long service life.
First, using polypropylene as raw material, it is made of continuous polypropylene long fibers produced by the melt-blown process.
Second, high filtration accuracy, large flow, uniform structure, large dirt holding capacity, and long service life
Third, it has good chemical compatibility, without any additives, and the fibers are not easy to fall off
Fourth, it is widely used
High dirt retention capacity:
In the depth of the entire filter element, the effect of grading and capturing particles by density is realized, so that the efficiency of the filter element can be brought into full play; higher dirt retention capacity means long service life, low replacement frequency, and cost savings; the surface density of the filter element is The density gradually increases from the surface to the center of the filter element; there are no surface blind spots that reduce the flow rate of the filter element and increase the frequency of replacement.
Pure polypropylene structure:
High-temperature bonding fiber; does not contain humectants, antistatic agents and binders, etc.; a wide range of chemical resistance; easy to handle after incineration; meets the requirements of the FDA food and beverage industry; will not produce leachables and emissions.
Free of surfactants, lubricants, antistatic agents, binders, and adhesives.
100% virgin polypropylene will not cause any contamination of the fluid.
Broad chemical compatibility.
Consistent performance without unloading contaminants even at high differential pressures.
High void volume with high dirt holding capacity.
Can be used for a wide range of applications.
Various adapters are available.
Pharmaceutical industry: pre-filtration of various injections, liquid medicines, injection bottle washing water, pre-filtration of large infusions and various antibiotics, and traditional Chinese medicine injections.
Food industry: Filtration of alcohol, beverages, and drinking water.
Electronics industry: Pre-filtration of pure water and ultrapure water.
Petroleum and chemical industry: filtration of various organic solvents, acids, and alkalis, oil field water injection filtration.
Wuxi Lenge Purification Equipments Co., Ltd. is a professional purification equipment manufacturer. Suitable for pharmaceuticals, laboratory, food & beverage, electronics, etc. If you are interested in purification equipment, please get in touch with us! You can call 86-510-85189266. Or send an email to export@wxljjh.com.
Do you know what is PES pleated filter cartridge?
PES pleated filter cartridge, also known as polyethersulfone folding filter elem...
Manufacturing Precautions for High Efficiency Filter Control Device
We usually use fresh air fans and air exhaust equipment in the industry, etc., a...
Bag filter product introduction
Bag filters are commonly used air filters in HVAC systems in the industrial and ...
Usage of liquid filter
Liquid filter is an indispensable device on the transmission medium pipeline. It...
86-510-85189266
export@wxljjh.com
Address: Block 1#, Shuangxin Economic Park, Xuelang, Wuxi City, Jiangsu Province, China.
All rights reserved © Wuxi Lenge Purification Equipments Co., Ltd.